Pasture – First Focus in 2025 can Boost the Bottom Line

Although the outlook for the cattle industry remains strong, several factors continue to weigh on herd rebuilding and expansion. Chief among them is the ongoing and spreading drought, along with the impending La Nina winter that likely will push those dry conditions into new areas.
Despite those challenges, Sam Ingram, Ph.D., Range & Pasture field scientist with Corteva Agriscience, says it’s important cattle producers maintain focus on preserving and strengthening their grazing acres.
“No matter the market conditions, it always makes sound economic sense to prioritize grazed forages,” Ingram says. “After all, grazing is the lowest-cost way to maintain a cow herd.”
Whether due to too little or too much moisture, Ingram says, our grazing lands will benefit long term from intensified management.

Improve what you have

Each operation is unique with individual goals and objectives. Staying nimble can help producers capitalize on opportunities when they decide the time is right for their business.

“Improving grazing acres during 2025 will help ensure they are at peak production and ready to support additional hooves on the ground, whether that means retaining extra heifers this fall or buying breeding stock next spring or whenever the cattle cycle shifts.”
Regardless, Ingram says, producers can enhance profit potential by improving the pasture acres they already have before looking to rent or buy more grazing space. One way to increase pasture productivity, improve forage quality and market more pounds of beef is to increase plant diversity — a practice that now is significantly simplified, thanks to the introduction of NovaGraz™ herbicide.
NovaGraz™ is the first product to offer broad-spectrum weed control while preserving white clover and annual lespedeza in pastures. This advancement in pasture weed control lets producers have clean pastures and retain the benefits of white clover and annual lespedeza. The nitrogen fixing capability of legumes, including clover and annual lespedeza, enhances forage quality for better animal performance and improved soil fertility.
“Until now, pasture herbicides couldn’t take out broadleaf weeds without also removing white clover,” Ingram explains. NovaGraz™ changes that, meeting a long-standing need among cattle producers.
“Without effective broadleaf weed control, the harm weeds cause to forage production and quality can outweigh the benefits these legumes provide,” Ingram says.

More Forage, Higher Quality

Eliminating weedy competition in cool-season grass/white clover pastures increases the amount of forage produced and improves utilization. In research trials where NovaGraz controlled broadleaf weeds and preserved white clover, pastures produced 21% more total forage compared with untreated sites. 1 (See table.)

Increasing forage quality by adding clovers in grass pastures also can help improve animal performance. In a Georgia trial, a significant population of white clover in toxic, endophyte-infected (E+) tall fescue pastures improved stocker gain per acre by 58% compared with grazing only E+ fescue. Stockers’ average daily gain (ADG) nearly tripled. In an Alabama trial, white clover in an E+ fescue pasture increased stocker gain per acre by 55% compared with E+ fescue alone. ADGs increased 44%. Improved forage quality also boosts cow-calf enterprises by delivering a higher plane of nutrition to benefit body condition, reproduction, milking and weaning weight.

“Anytime those gains come from grazed forages, it benefits the livestock producer’s bottom line,” Ingram says.

Multiple years of testing show NovaGraz™  provides broad-spectrum control of important broadleaf species, including ironweed, cocklebur, wild carrot, buttercup, biennial thistles, ragweed, plantain, woolly croton, poison hemlock and many others. In addition, NovaGraz™  herbicide:

• Controls a broad spectrum of weeds in pastures, rangeland, hayfields and Conservation Reserve Program (CRP) acres.
• Carries no grazing restrictions for beef cattle and only minimal haying and manure restrictions after application.
• Provides effective, broad-spectrum weed control where a non-residual option is desired for maximum flexibility in hay marketing and crop rotation.
• Provides high-quality, diverse grazing, which can increase per-acre beef production.

Time = Opportunity

Delayed herd expansion gives producers access to a rare commodity — time. “The smallest cowherd in decades means less grazing pressure on most pastures,” Ingram says. “Adding a cross fence or two can allow for more-intense grazing management that can include longer rest periods while still improving forage utilization.”

Ingram offers several other steps to consider during the 2025 grazing season that can help restore forage production and prepare for the profitable opportunities ahead:
Get your boots dirty. Scout pastures early and often but do it well. To truly understand what’s happening on your grazing lands, it’s important to get out of the saddle or from behind the steering wheel. Effective pasture evaluations result from boots — or, better yet, knees — on the ground to get a good look at what’s happening at soil level.

Manage moisture for maximum benefit. To help speed recovery, control low-value, undesirable plants. In rain-saturated areas, weeds will aggressively outcompete forage grasses. Where herbicides are needed to help reset the pasture, consider a residual herbicide, which will help control biennial thistles and other weeds early, along with later- emerging species, like ragweed.

Add flexibility in grazing management. Cross fencing provides flexibility. Move cattle between paddocks based on the level of production and the amount of rest needed for the previously grazed pasture to recover. This can help improve forage utilization and allow for greater rest-recovery periods.

Consider cultural practices to boost productivity. Incorporating weed and brush control, fertilizing according to soil test or overseeding where needed all can help restore productivity.

Weathering La Nina

Many of the steps outlined above hold true for areas dealing with this winter’s La Nina event — especially in Southern regions where moisture deficiencies already had degraded pasture conditions, leading into last fall’s critical fall recovery window.

Drought expanded and intensified into early fall in many areas south of the predicted La Nina line, Ingram says, and he recommends special considerations for cattle ranchers to manage through these weather challenges.
Ingram recommends special considerations for cattle ranchers to manage through upcoming weather challenges.

“For those with equal or above-equal chances of rainfall, capitalize on that moisture this winter so we have grass going into spring,” he says. “On the southern side of the line with limited moisture chances, make plans to conserve forages and possibly look into adding stored forages to carry through the winter.”

Manage for the Long Term

As pastures emerge this spring, Ingram recommends producers in areas already dealing with drought implement a three-prong approach:

1. Be proactive. Feeding hay is expensive but pales in comparison with the long-term harm overgrazing drought-stressed pastures can cause. Difficult decisions today will pay off down the road.
2. Be patient. Come spring, resist the temptation to turn cattle out too soon. Cool-season grasses green up quickly. Grazing too early will inhibit roots from reestablishing ultimately leading to weaker, thinner plant stands. Give grasses as much time as possible to rebuild root structure and help speed recovery, even if that means extending hay-feeding season.
3. Be observant. When moisture returns, low-value weeds will be among the first plants to emerge. Scout pastures early and eliminate opportunistic weeds before they outcompete recovering grasses. It’s important to feed those grasses too. Consider pulling a soil test and fertilize accordingly when moisture returns.

“Ask yourself, ‘Do I want to grow grass or do I want to grow weeds?’” Ingram says. For broadleaf weed control where preserving white clover isn’t a goal, he recommends a residual product, such as DuraCor ® herbicide, to keep weeds out of the way and ensure all available moisture goes to growing grass. UltiGraz ℠ Pasture Weed & Feed is a good option to efficiently and cost-effectively combine weed control and fertility in a single pass.

Most important, Ingram says, think long term and protect root reserves at all costs.

“Drought forces many extremely difficult decisions, but we must have grass to have a sustainable beef operation,” he says. “Difficult decisions today will pay off as La Nina conditions fade and moisture returns.”

Bring your rangeland and pasture management questions to Booth #3142 during CattleCon 2025 in San Antonio, Feb. 4 to 6. Back on the ranch, work with your trusted advisers, such as your local Extension agent, consultants or your Corteva Range & Pasture Specialist, and visit RangeAndPasture.com/NCBA

White clover by the numbers
The introduction of NovaGraz™ herbicide ends the white clover conundrum. Cattle producers no longer need to sacrifice white clover to control broadleaf weeds in their pastures. As the only product on the market that controls a broad spectrum of weeds and preserves white clover and annual lespedeza, NovaGraz™ can help:

• Improve conception rates by up to 25% with white clover in cool-season grass pastures.
• Increase stocker average gain by up to 50% with the inclusion of white clover in pastures.
• Raise soil nitrogen by up to 150 pounds of nitrogen per acre with white clover. Although the numbers speak for themselves, an interactive guide from Corteva Agriscience provides a deeper dive in to the data. The tool is available at RangeAndPasture.com/ByTheNumbersNCBA and provides videos, application tips, technical information and more.

1 Sleugh, B., Corteva, et al. Can I Keep My Clover? Rinskor Active: A New Herbicide Enabling Selective Broadleaf Weed Control in White Clover-Grass Pastures. Weed Science Society of America-Western Society of Weed Science Joint Meeting, March 2-4, 2020, Maui, HI.

Legals:
™ Trademarks of Corteva Agriscience and its affiliated companies. Under normal field conditions, DuraCor ® is nonvolatile.
DuraCor has no grazing or haying restrictions for any class of livestock, including lactating dairy cows, horses (including lactating mares) and meat animals prior to slaughter. Label precautions apply to forage treated with DuraCor and to manure and urine from animals that have consumed treated forage. Consult the label before purchase or use for full details. White clover and annual lespedeza exhibit some initial injury (such as lodging and loss of vigor) with NovaGraz application but recover. DuraCor and NovaGraz are not registered for sale or use in all states. UltiGraz℠ with fertilizer is available for use with specific herbicides in the states of AL, AR, CO, FL, GA, HI, IA, ID, KS, KY, LA, MN, MO, MS, MT, NC, ND, NE, NV, OK, OR, SC, SD, TN, TX, UT, VA, WA, WI, WV and WY. Contact your state pesticide regulatory agency to determine if a product is registered for sale or use in your area. Rinskor ® is a registered active ingredient. Consult the label before purchase or use for full details. Always read and follow label directions.

 

 

Top 12 Things to Consider Before Building a Cattle Handling Facility

By Robert Wells, Ph.D.

Former Noble Research Institute • Senior Regenerative Ranching Advisor

Properly designed and thought-out facilities will be safe for the producer and animal and will allow for cattle to be easily worked in a timely fashion.

The cattle handling facility is at the heart of most every ranch. The quality of the facility and its ease of use can determine the enjoyment or frustration of use and dictate how often you work cattle through it. Properly designed and thought-out facilities will be safe for the producer and animal, handle cattle with ease, require a minimal number of personnel and allow for cattle to be worked in a timely fashion.

There are multiple design principles that can be used, depending on the cattle-handling abilities of the personnel and their ability to understand “cow psychology.”

Here are the top 12 factors you should consider prior to building a new facility.

1. Use Type

Consider the species and type or class of animal for which the working facility will be used. Will it only be used for cattle, or will you need to handle goats and sheep, or horses, in addition to cattle? If it’s only cattle, will it be used only for a stocker operation, or will you need to process cows, bulls and calves through the chute as well? The size of cattle worked will dictate how wide of a raceway you need. Finally, do you plan to rope and drag calves, or process through a chute? Roping and dragging calves will require an area large enough to do so.

2. Bud Box or Solid-Sided, Curved Designs

Both Bud Box and solid-sided, curved designs are effective. In general, the curved, solid-sided-fence facility, in my opinion, allows the cattle handler to make mistakes and recover without adversely affecting cattle flow. If you are in the wrong position yet the animal cannot see you because of the solid side, it may not affect the movement of cattle. A drawback to this style is it is more complicated and costly to build because of the curves and the added expense of the solid-sided fences.

The Bud Box system uses the animal’s instincts to your advantage. It works on the principle that animals will want to return to where they have been if they cannot proceed further. When they turn around and head back in the direction that they came from, the animal is diverted down another alley or raceway leading up to the working chute. The drawbacks to this system are that it is typically not recommended for novice cattle handlers, and if handlers are out of place, they can impede cattle movement.

3. Location

It’s all about the location. The working facility should be central to most pastures and easily accessed, either using lanes or along adjoining fences that help funnel cattle into the facility. Having a corral situated where cattle have to routinely enter and leave on their own will facilitate penning them on working day. 

One example is a catch pen situated between pastures that cattle must walk through when rotating from one pasture to the other. It could be a central watering location or where feed and hay are fed to the animals. If you plan to use the facility to hold sick or freshly received animals for a few days, then having shade from trees along the fence might be beneficial.

4. Materials

There are numerous materials that a set of working facilities can be built out of: drill stem pipe, highway guardrails, cable, sucker rod, cattle panels, wood. All have their benefits and drawbacks. In general, metal building materials will probably outlast wood. Cable fences are not well-suited for working and crowding facilities. They flex too much and can allow calves to get through. 

Likewise, if you have to quickly climb a fence to get away from an aggressive animal, cable fences will not support your weight well enough to allow you to quickly escape. Make sure any drill stem you purchase is not magnetized, as it makes welding difficult. Also, make sure the drill stem is not radioactive or excessively rusty if it has been used in drilling activity. 

Graduated cattle panels have smaller hole sizes on the bottom of the panel, making them difficult to climb when in a hurry. If using sucker rod, consider welding a clip over the rod to the line post. Experience has proven that welding a sucker rod only to a post will result in a broken weld.

5. Utilities

Having access to electricity and water is beneficial but not necessary. If you plan to use an electric branding iron, access to land-line electricity will eliminate the need for a costly and loud generator. 

If you have electricity available, you can have a small room located next to the chute to store medicine and vaccines in a refrigerator. Additionally, you can have hot water to help clean up the equipment after use.

6. Cover and Shade

It is beneficial to have cover over the working chute in case you have to work the cattle in extremely hot or inclement weather. Additionally, you may decide to have a portion of the pens covered in case you need to hold a quarantined or sick animal in the facility for a length of time.

7. Slope

The working facility should have a small degree of slope to allow drainage during and after rainfall events. The slope should not be so great that erosion or channeling will occur after the grass has been trampled down. 

Additionally, consider the degree and direction of the slope when planning where you will back up a trailer to the pens. Backing across a slope when muddy may result in the trailer sliding sideways. Trying to pull up a muddy slope when loaded may be difficult, too.

8. Calf Chute, Palpation Cage, Gates

Buy a chute that is large enough to handle your largest animal, including your bull. It may be necessary to restrain the bull to treat a foot or to conduct a breeding soundness exam. Remember, bulls are longer and thicker than a cow. Many of the economy-type chutes are not designed to hold a bull. Also plan for a palpation cage at the end of the chute to allow a safe access area for a veterinarian so he or she doesn’t have to worry about getting run over by the next cow in line. The cage will also be handy if you have to treat a hind foot

Design the facility with options. It is much easier to work 2- to 3-month old calves in a calf chute than in a large, cow-sized chute. Do not skimp on gates! Make sure they are heavy and well-built. Plan on gates between adjacent pens and from the alleys. Having gates between pens allows you to open up adjacent pens to create one large pen when needed. Use headers across the top of the gate to ensure it stays in line and does not sag, so it opens and closes as it should. Make the headers high enough that you can drive equipment or ride horseback under them.

9. Access to Roads

You should plan to have all-weather road access to the working facility to enable you to load and unload cattle even in rainy conditions. However, placing a set of corrals right off a county road could enable cattle thieves to bait your cows into the pens and easily and quickly load out and steal animals, so keep that in mind.

10. Size

The size of the facility will be determined by the activities needed and how long you plan to hold cattle there. If you are just using the pens as a holding area while working the cattle, each cow-calf pair will require a minimum of 35 to 45 square feet. The larger the calf while on the cow, the more room that will be required.

11. Number of Pens

One of the biggest design mistakes we see is a facility without enough holding pens. It is always good to plan to have at least one more pen than you think you need. At the minimum, three pens are needed. You will need one large pen to hold the cattle when they are first caught, and then preferably two more to sort calves and cows into. This will also allow you to have an open pen to catch the animals after they have been worked so that they do not get mixed with unprocessed cattle. Designing an alleyway alongside the pens that leads to the chute allows you to sort animals out of the alley and into the pens. Additionally, the alley can be used to hold cattle temporarily.

12. Other Considerations

Build with flexibility in mind:

• Design the facility so that expansion will not require a major overhaul.

• Make the design modular so more pens can be added alongside existing alleys.

• Make the raceway leading to the chute adjustable to enable it to be wide enough for cows, but can be adjusted down so that a calf cannot turn around in it.

• Do not design the facility so that   
the chute turns out into the pasture. If you miss a head catch on an animal, you cannot easily recycle it back around.

• Set all posts at least 3 feet down into concrete.

• If concrete is used under the chute, extend it at least 6 to 8 feet past the front of the chute. Make sure the concrete is heavily grooved to provide traction even when covered with mud and manure.

• Reduce shadows that go across alleys by running alleys east and west if possible. Cattle do not have depth perception and may view a shadow as a hole or trench, causing them to balk.

Visit, Plan, Visualize

As you design your handling facility, go see as many other working facilities as possible in person. Talk with the people who use them, and ask what they like and what they would change. Draw your design out on paper, and then lay it out on the ground to scale. Use marking paint and survey flags to help you visualize the layout before building. Then walk through the layout as you would when working cattle. It is far easier to make adjustments in the planning stage than after everything is built.

Skip to content